Figure skating tights over boot 50 Den -...
Figure skating tights made of soft stretch microfibre suitable for training and competition
Kingpin for the Roll Line Matrix and Matrix Steel skates. If you need advice on replacing it, contact us!
Kingpin for the Roll Line Evo skates. If you need advice on replacing it, contact us!
Complete set of suspensions for the Giotto and Spin Roll Line skates, consisting of 8 pieces (4 upper and 4 lower suspensions). The components are already lubricated and ready for assembly. In case...
High quality self-locking wheel nuts, lowered than ISO standards, with gold finish, m7, suited for 7 mm axles. They are an important accessory, which has a limited life and must be constantly...
Lower Roll Line click cup, suitable for the following models: Variant C Mistral Energy / Energy Steel Matrix / Matrix Steel Evo Package contents: 4 pieces.
Replacement axle for the Line inline skate of the Roll Line, usable in the two external positions (front and rear). During assembly, remember to position the wave washer, which acts as an...
Kingpin for the Roll Line Variant F/M skates. If you need advice on replacing it, contact us!
Roll Line upper cup, suitable for the following models: Variant F/M /C Mistral Energy/Energy Steel Mariner Cup (discontinued) Package contents: 4 pieces.
Each wheel of a Line inline skate of the Roll Line must necessarily be equipped with a spacer, to ensure the smoothness of the wheels and to avoid damage to the frame. The spacer must obviously be...
Self-locking kingpin nuts suitable for the Roll Line Variant frame. Wrench size 17 mm.
The pivot cups of your Roll Line skates wear out with use and must be replaced periodically. The operation is not complex, but it requires a little practice and a minimum of equipment: if you don't...
The spacers are an accessory designed to quickly assemble the wheels of quad skates. In fact, when using them, it is not necessary to adjust the tightening of the wheel lock nuts: it is sufficient...