- -€4.00
Roll Line Mariner Cup frame
The frame is recommended for competitive athletes. It comes with 1 set of toes stop, 1 keys kit for maintenance, 1 set of spacers, 1 set of fixing screws, 1 set of self-locking nuts
Bushings set consisting of 8 pieces: 4 upper bushings and 4 lower bushings.
100% safe payments with PayPal
Without questions within working 14 days
By phone, live chat, Whatsapp, as you prefer
Careful and sustainable packaging
Complete set of suspensions for the Giotto and Spin Roll Line skates, consisting of 8 pieces (4 upper and 4 lower suspensions). The components are already lubricated and ready for assembly. In case of need, it is possible to use different hardness bushings on the same truck: in this case, the hardest bushing must be the lower one, i.e. the smallest one.
The suspensions are the most important part for the proper functioning of a skate, it is therefore advisable to regularly check its state of wear. In any case, it is recommended to replace them at most every 6 months. For more details, do not hesitate to contact us!
The frame is recommended for competitive athletes. It comes with 1 set of toes stop, 1 keys kit for maintenance, 1 set of spacers, 1 set of fixing screws, 1 set of self-locking nuts
The Saturno frame is produced by Roll Line for the Compulsory specialty. It is indicated for an intermediate level. The frame is supplied with 2 sets of cushions and 1 kit of keys for...
Plate designed for Figure specialty. Recommended for athletes who move their first steps in competition. The pack contains 1 set of standard toes stop, 1 keys kit for maintenance, 1 set of self...
To ensure a perfect fit, measure the circumference of your head starting from the center of the forehead and match it with the following sizes: fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
XS/S 20 – 21.25 in (51 – 54 cm)
S/M 21 – 22.5 in (53 – 57 cm)
L/XL 22.5 – 23.5 in (57 – 60 cm)
XL/XXL 23.5 – 24.5 in (60 – 63 cm)
S - Small Waist: 66 - 76.2 cm / 26" - 30"
M - Medium Waist: 73.7 - 83.8 cm / 29" - "33"
L - Large Waist: 81.3 - 96.5 cm / 32" - 38"
XL - Extra Large Waist: 91.4 - 106.7 cm / 36" - 42"
JR: 5 – 6 in (12.2 – 15.2 cm)
S: 6 – 8 in (15.2 – 20.3 cm)
M: 8 – 10 in (20.3 – 25.4 cm)
L: 10 – 12 in (25.4 – 30.5 cm)
XL:12 – 14 in (30.5 – 35.6 cm)
KP 22 Knee Pads
JR: 11 – 12.5 in (28 – 32 cm)
S: 12.5 – 14.5 in (32 – 36 cm)
M: 14.5 – 16 in (36 – 40 cm)
L: 16 – 17 in (40 – 44 cm)
XL: 17 – 19.5 in (44 – 50 cm)
KP PRO knee pads
S:12.5 -14.5 in (32-36cm)
M:14.5 -16 in (36-40cm)
L: 16 -17 in (40-44cm)
XL: 17 - 19.5 (44-50cm)
JR: 5 – 6 in (12.2 – 15.2 cm)
S: 6 – 8 in (15.2 – 20.3 cm)
M: 8 – 10 in (20.3 – 25.4 cm)
L: 10 – 12 in (25.4 – 30.5 cm)
XL:12 – 14 in (30.5 – 35.6 cm)
S: 7.0 - 8.0 in / 17.78-20.3 cm
M: 8.0-9.0 in / 20.3-22.8 cm
L: 9.0-10.0 in / 22.8-25.4 cm
XL: 10.0-11.0 in / 25.4-27.94 cm
XS/S: 20-21,25 in / 51-54 cm
S/M: 21-22,5 in / 53-57 cm
L/XL: 22,5-23,5 in / 57-60 cm
XL/XXL: 23,5-24,5 in / 60-63 cm
S: 12,5-14,5 in / 32-36 cm
M: 14,5-16 in / 36-40 cm
L: 16-17 in / 40-44 cm
XL: 17-19,5 / 44-50 cm
Complete set of suspensions for the Giotto and Spin Roll Line skates, consisting of 8 pieces (4 upper and 4 lower suspensions). The components are already lubricated and ready for assembly. In case...
The pivot cups of your Roll Line skates wear out with use and must be replaced periodically. The operation is not complex, but it requires a little practice and a minimum of equipment: if you don't...
Kingpin for the Roll Line Evo skates. If you need advice on replacing it, contact us!
Replacement axle for the Line inline skate of the Roll Line, usable in the two external positions (front and rear). During assembly, remember to position the wave washer, which acts as an...
The spacers are an accessory designed to quickly assemble the wheels of quad skates. In fact, when using them, it is not necessary to adjust the tightening of the wheel lock nuts: it is sufficient...
Complete set of suspensions for the Giotto and Spin Roll Line skates, consisting of 8 pieces (4 upper and 4 lower suspensions). The components are already lubricated and ready for assembly. In case...